Empire Wall Furnace, DV Counterflow, 24V without Thermostat, 55,000 Btu/Electronic Pilot

Empire Wall Furnace, DV Counterflow, 24V without Thermostat, 55,000 Btu/Electronic Pilot

FUEL TYPE
Price: $3,329.00
List Price: $3,661.90
Price: $3,329.00
You Save: $332.90 (9%)
GET UP TO 15% OFF NOW WHILE SUPPLIES LAST! THIS ITEM SHOWS LOW STOCK | ENDS:

View Cart

Empire Wall Furnace, DV Counterflow, 24V without Thermostat, 55,000 Btu/Electronic Pilot

These Empire Heating Systems Direct-Vent Counterflow Wall Furnaces may be recessed between standard wall studs and can be installed on an outside wall.  Provides total comfort for a fraction of the cost of electric heat.

Matchless pushbutton piezo ignition for manual operation; also works with optional thermostats or other remote controls.  Front panels remove for cleaning and servicing.  Counterflow design circulates warm air at floor level.

Specifications Details
Color Cabinet and Front Panels Beige
BTU Input 55,000
Blower Output (Cu. Ft./Min) 400
Width 16”
Depth 11 5/16”
Height 82 3/8”
Shipping Weight 140 lbs (two cartons)
Works with Manual Toggle Switch, Thermostat Wall Switch, Remote Control
Minimum Clearances to Combustibles (From Top to Ceiling) 4”
Minimum Clearances to Combustibles (From Each Side) 4” without register, 18” with SOR1
Bottom of Unit to Wood Floor Zero
Depth Unit May Be Recessed 4”
Type of Gas (State on Order) Natural Gas / Propane
Iron Pipe Size (N.P.T.) 1/2”
Wall to Valve Inlet 6 1/2”
Center of Heater to Center of 1/2” Inlet Elbow 3”
Floor Covering to Valve Inlet 3 3/4”
Wall Depth (Minimum) 4 1/2”
Wall Depth (Maximum) 13”
Vent Opening (Inside Wall Surface) 7 1/2” Diameter
Vent Opening (Outside Wall Surface) 7 1/2” Diameter
Center of Vent to Nearest Outside Corner of Building 24”
Edge of Vent to Nearest Projecting Surface 6”
Vent Projection from Outside Wall 6”
Center of Flue to Floor Covering 64 7/8”
Safety Controls Pilot and Main Burners Include Automatic Shut-off
Warranty 10-year limited (combustion chamber), 1-year limited (all other parts)


Features:

  • DVC55SPP/ DVC55IP (55,000 Btu) and DVC35SPP/DVC35IP (35,000) install on outside wall
  • Thermostat not included
  • Choose Standing Pilot or Electronic Intermittent Pilot (saves even more energy)
  • Front Panels Removed for Cleaning and Servicing
  • Counterflow Blower Circulates Warm Air at Floor Level
  • Multi-Room Heating Capacity with Optional Outlet Kits
  • Up to 76% A.F.U.E. efficient
  • Made in the USA

Options and Accessories

TRW Wall Thermostat, Wireless

TRW Wireless Remote Wall Thermostat

  • This convenient wall thermostat puts you in control, allowing you to adjust your gas log settings from an easily accessible wall switch. Empire Comfort Systems makes your life simple with the added luxury of fireplace accessories that improve the quality of your gas log experience.

TDV1 Temperature Wall T-Stat-Digital, High-Efficient Wall Furnace Control

Wall Thermostat, Digital, Wire

Features:

  • Type: Digital Wire Wall Thermostat
  • Weight: 1.00 lbs
  • For use with your Empire High-Efficiency PVS18 and PVS35 UltraSaver90 Plus Heating Systems.

T24V

T24V 24-Volt Wall Thermostat Direct-Vent Wall Furnace Accessory

  • Thermostats make a heating appliance more efficient, more precise, and easier to control. That's the concept behind this Empire 24-Volt Wall Thermostat, too. It takes your Empire High-Efficiency Direct Vent Wall Furnace and makes it a more accurate and effective heating tool in your home. Get everything you want to out of your favorite appliance by adding this simple thermostat to the mix.

VSK2 Slim-Line Vent Kit

Empire Vinyl Siding Kit Direct-Vent Wall Furnace Accessory

  • This vinyl siding vent kit installs on virtually any type of home providing a smart clean look to finish off your exterior vent. Its new slim-line look offers a less intrusive view of the outside of your home.
  • Includes Siding Kit Only. includes outside wall plate with vent shield. Does not include vent tube, cap or wall plate.


Features:

  • Type: Vent Kit
  • Weight: 2.50 lbs
  • Slim Vent Kit
  • For Vinyl Siding Horizontal
  • Model VSK1: For use with DV210SG and DV215SG By Empire Comfort System
  • Model VSK2: For use with DV25SG and DV35SG By Empire Comfort System

DV822

DV822 Vinyl Siding Vent-Kit

  • This vent kit installs on a vinyl sided home. It provides a clean look to finish off your exterior vent. This item is only the Vinyl Siding Vent Kit. It does not include a vent cap.
  • The Vinyl Siding Vent Kit is for use with Empire Direct-Vent Wall Furnaces.

SOK1

SOK1 10" Side Outlet Kit

  • For both direct vent and conventional vent counterflow wall furnaces, this side outlet kit allows heat to disperse from the side of the furnace cabinet. It does require the side outlet register (SOR-1 sold separately) to redirect the heat flow.

Features:

  • Type: Outlet Kit
  • Siding Outlet Kit
  • Fits DVC35SPP, DVC35IP, DV55SPP, and DV55IP Counterflow Wall Furnaces

SOR1

SOR1 Side Outlet Register

  • Empire Direct Vent Counterflow Furnace Side Outlet Register


Features:

  • Type: Register
  • Side Outlet Register
  • Fits: DVC-35SPP, DVC-35IP, DV-55SPP, and DV-55IP

Manuals:

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)